Wall Switch

The Wall Switch provides variable brightness control with no user setup or external control boxes. It automatically groups with co-located Autonomy Sensors within minutes of initial power-up. Users can pair their smartphone through NFC to modify all settings.

Get Started

Wall Switch Datasheet.pdf

OVERVIEW

The Autonomy Wall Switch automatically pairs with co-located
JDRF Electromag Autonomy Sensors to provide lighting control without programming or control boxes.

DIMENSIONS

FEATURES

‍Networking Automatically pairs with co-located Autonomy Sensor(s).
‍Mechanical ActuationNon-latching rocker provides on/off and brighten/dim using 'press-and-release' and 'press-and-hold' interactions, respectively.
NFC Smart Phone PairingIntegrated NFC transceiver allows users to pair their smart phone with the wall switch with a simple tap.
‍BluetoothIntegrated Bluetooth radio allows users to issue commands from their smart phone directly to the Wall Switch.
Status IndicatorWhite LED.

GUI

MOUNTING

‍Installation Mounts to a single or multi-gang wall box. Refer to diagram below for ideal mounting location to auto-group with luminaires equipped with Autonomy Sensor.

STANDARDS

UL cULus listed UL60730 and UL94.
‍FCC Part 15 Subpart B&C.

POWER

Input Voltage 120-277 VAC 50/60 Hz.
‍Input Power 3 W maximum.

WIRELESS

Communication Protocol 2.4GHz IEEE 802.15.4 Mesh and Bluetooth® 5 Low Energy (BLE).
‍Transmitter Power+8 dBm.
Range30 meters (100 ft) line of sight.

ENVIRONMENT

Operating Temperature 0-45ºC (32-113ºF).
‍Storage Temperature 0-75ºC (32-167ºF).
Relative Humidity Operating range of 5-95% (non-condensing).
Environment Dry indoor use only.

WARRANTY

5 year manufacturer limited liability.

Wall Switch

Contact us to learn more