Controlled Receptacle

Meet plug-load building code requirements without programming or external hardware.

OVERVIEW
The Controlled Receptacle meets electrical code-requirements for automatic shut-off of connected loads when the room is vacant. It automatically pairs with co-located luminaire which provide the occupancy/vacancy status of the room. Integral relay and Bluetooth Mesh connectivity simplify installation and eliminate the need for manual programming or external control hardware.

Simly install and energize the Controlled Receptacle and allow for an unobstructed line of sight to at least one co-located luminaire. Within minutes the Controlled Receptacle is automatically paired with no user involvement. Once paired, it will be automatically shut off when all lights in the same room detect vacancy and turn on anytime at least one luminaire in the room detects occupancy.

All settings can be easily modified through a mobile application which communicates directly to the Controlled Receptacle using Bluetooth.
DIMENSIONS
LOAD
ConfigurationSingle (one-pole), switched terminal marked 'Controlled'
Voltage
120 VAC single phase
General AC 20 A
Tungsten 12.5 A
LED/CFL 5 A
Resistive 15 A
Inductive 10 A
Motor 1 HP
Total (Both Poles) 20 A
POWER
Input Voltage 120 VAC 50/60 Hz
Input Current 100 mA maximum internal consumption
Switching Mechanism Zero-cross detection
STANDARDS
UL cULus listed 498-SA
FCC Part 15 Class A
Bluetooth Mesh Certified
Cybersecurity ANSI/ISA 62443-4-1
WIRELESS
Communication Protocol 802.15.4Bluetooth Mesh
Frequency
2.4GHz
ENVIRONMENT
Temperature 0ºC - 40ºC (32ºF - 104ºF)  
Humidity0% - 90% (non-condensing)
EnvironmentDry indoor use only
WARRANTY
5 year manufacturer limited liability