Autonomy Sensor

Sensors automatically build a secure wireless mesh network and configure ASHRAE compliant motion and daylight groups. No human interaction is required before, during or after luminaire installation.  

Get Started
OVERVIEW
The Autonomy Sensor contains a wireless radio, DALI communication interface, motion detector, daylight sensor and a Near Infrared (NIR) optical system. Available in white and black.

DIMENSIONS
Sensor
MOTION
Detection Technology Near Infrared (NIR).
Major and Minor Motion Complies with NEMA WD 7- 2011. 
Control Mode Auto-on, auto-off.
Occupancy Level 50% power (default), user-adjustable.
Occupancy Hold Time 20 mins (default), user-adjustable.
Occupancy to Vacancy TransitionReduce by 50%, wait 10 seconds (x3), user-adjustable. 
Grouping Automatic, user-adjustable.
Placement Can be located near moving air ducts (no minimum distance).
Mounting Height 3.7 m (12 ft) maximum.
Coverage Area
DAYLIGHT
Control Mechanism Closed-loop continuous dimming.  
Control Mode Dim to minimum (default), dim to off (user-selectable).
GroupingAutomatic (default), user configurable. One daylight group is created in an area with combined total power of 300 W (+/- 20%) or less. Two daylight groups are created in an area with combined total power more than 300W (+/- 20%).
LED INDICATOR
Luminaire Factory Test Pass On (24 hour duration).
Normal Run Mode Pass
On for 0.5 seconds every 30 seconds.
Error (Internal)
On for 0.5 seconds, off for 1 second.
Error (LED Driver)On for 0.5 seconds, off for 3 seconds. LED driver goes to the
‘system failure level’ if there is no heart-beat signal issued by the sensor. 
LED DRIVERS & BRIDGES
The Autonomy Sensor works with any D4i compliant LED Driver or Bridge. See the list below for commonly used LED drivers and Bridges.
  • Advance Xitanium SR® 40W Linear LED Driver XI040C110V054VPT
  • Advance Xitanium SR® 40W Gen 2 Linear LED Driver XI040C110V054VPT2
  • Advance Xitanium SR® 75W Linear LED Driver XI075C200V054VPT1
  • Advance Xitanium SR Flextune® 40W XI040C110V050VWT1
  • Advance Xitanium SR® Bridge SRB-BS/SRB-LD
  • Advance Xitanium SR® Bridge Gen 2 SRB-BS2/SRB-LD2
  • Osram OPTOTRONIC OTi 30W Driver with DEXAL® Technology
  • Osram OPTOTRONIC OTi 50W Driver with DEXAL® Technology
  • Osram OPTOTRONIC OTi 85W Driver with DEXAL® Technology
Sensor
EMERGENCY LIGHTING
Bodine BSL310/BSL310LP/BSL10ST/BSL6LST (refer to manufacturer datasheet/application notes for best practices).
ENVIRONMENT
Temperature  0ºC - 40ºC (32ºF - 104ºF).
Humidity
0% - 90% (non-condensing).
Environment
Dry indoor use only.
STANDARDS
UL cULus listed 8750, UL 2043 plenum.
IEC
61347-1 Part 1, 61347-2-11 Part 2-11.
FCC
Class A Part 15 Subpart C.
ISED RSS-247.
‍‍Intra-Luminaire D4i and DALI 2 compliant (part 351 type D).
POWER
Input Voltage NEC: Class 2 (9.5 - 22.5 VDC).
Input Current
46 mA maximum.
Wiring
2x18 AWG (supplied) connect to LED Driver.
WIRELESS
Communication Protocol Bluetooth Low Energy and 802.15.4 Mesh. 
Frequency
2.4GHz.
Latency
50 ms (3-sigma).
Modulation Frequency-Shift Keying.
Data Rate2Mbps (maximum).
WARRANTY
5 year limited liability.
MODELS
JDRF-AS-01-B: Autonomy Sensor (Black).
JDRF-AS-01-W: Autonomy Sensor (White).

Contact us to learn more

We would be happy to arrange a presentation and a demonstration of our technology. Please contact us or book a meeting to get started.

Get Started